Tri-Mist 850-G2: Mist and Smoke Collector for Metalworking Fluids
The Tri-Mist 850-G2 is a high efficiency mist and smoke collector. It is effective on all metal working fluids. Featuring double-pass ESP technology and operating on less than 450 watts , the Tri-Mist 850-G2 does not require disposable filters. A compact design allows it to be directly mounted onto the machine tool enclosure. It requires little maintenance and has a low operating cost.
Dimensions: 26" x 13.75" x 21.5"
Inlet Opening: 16.70" x 9.10"
Cabinet: 16 ga Steel welded with chemical resistant powder paint
Weight: 100 lbs Installed;
ESP Power Supply: Solid state& self-regulating.
Electrical Rating: 115 V , 50-60 HZ, 4 amps.208-230 V, 50-60 HZ, 2 amps.400-480V, 50-60 HZ, 1 ampVoltage must be specified when ordered.
1st Stage: 4" mechanical impinger.
2nd Stage: ESP cell 53 sq. ft. of surface area
(Minimum voltage gradient is 20,000 volts per inch.)
3rd Stage: ESP cell 53 sq. ft. of surface area.
4th Stage: 1" thick post filter
5th Stage: Optional HEPAMAX filter rated at 99.97% DOP @ .3 micron.
Airflow: 50-850 CFM
For more information on the Tri-Mist 850-G2 mist and smoke collector for metalworking fluids, please fill out the form below or call 828-328-8104.
For any inquiries, questions or commendations, please call: 828-328-8104 or fill out the contact form below. We look forward to hearing from you.
311 15th St SW
Hickory, NC 28602
To apply for a job with Equipment LTD, please send a cover letter along with your resume to: